
Stock #: AT5200DG
Atari C.P.S. 5200 Diagnostic Cartridge for 2 and 4 port models
with 8 diagnostic tests, any video, color bars, port test, pokey
adjust, (critical cursor left side to right side range
adjustment), tone test (all 4 registers), ram test, verify O.S.
ROM test and burn in loop test. RARE item - Great for collector.
NEW
Price: $ 59.95 |

Stock #: AT5200SN
5200 CX53 Track Ball Optocoupler sensor module. This is what you
need to replace in your CX53 track ball if you can only control
either up and down or left to right. There are 2 Optocouple
sensor modules on the trackball printer circuit board.
Price: $ 5.95 |

Stock #: C018126-G
Lifetime CX52 Numeric Keypad - Upgraded Gold Dot CX52 Numeric
Keypad, now has TWELVE 5 mm GOLD Dot metal contacts. These 5 mm
Gold metal contacts are some of the largest contacts ever used
on any of the Atari CX52 Replacement Joystick Numeric Keypads
produced over the last 20 years.
The New "Gold" Dot CX52 Keypad also has the improved feel with
the Tactical Feed back feature. You can now visually tell a
Standard Atari CX52 Numeric Keypad from the New "Gold" improved
lifetime version (and our new Upgraded Rebuilt CX52 Joysticks)
by the New Gold Colored Silk screened numbers on the numeric
keypad.
Price: $ 7.95 |

Stock #: C018127-G
Lifetime CX52 Orange Fire button has a Lighter but Firmer /
Crisper feeling Fire Button now with a New State of the Art
Tactical Feed back feature. Now each time you press on the firm
improved Gold dot fire button, as you release the Atari CX52
fire button, it will bounce back and give your finger a tactical
response telling you the fire button as been PRESSED and
RELEASED. In a Side by Side comparison, the older series of
Atari CX52 Orange fire buttons compared to Lifetime CX52 fire
buttons with Gold contacts are a Night and Day Tactical
difference. Mush with no Tactical feed back Vs State of the Art
Tactical fire button Feed back. Sold as a set of two fire
buttons.
Price: $ 12.95 |

Stock #: RT18128-G
Lifetime CX52 replacement Auxiliary Function Keypad (start,
pause, reset)using molded GOLD plated 6mm metal disks, replacing
the original Atari 4.5mm carbon dot. Gold Plated Metal
Conductive Disks have a Contact Resistance of 0 Ohms! Our in
house tests have shown even after 4,000+ Up/Down, On/ Off cycles
(on all three conductive metal disks) that the conduct
resistance stayed the same 0 Ohms. Our Manufacture has tested
this New Version Auxiliary 5200 Key pad to over 100,000 cycles
with No failures!
With the new keypad with gold plated metal disks installed you
will most certainly never have to replace them again, at worst
case scenario, you will have to manually clean them, although
they are self-cleaning. Increased performance, tested to over
100,000 cycles with no failures. NOTE>>> These can not be used
with the older CX52 flex circuits with the silk-screened black
carbon traces (non metal traces). For those 5200 controllers use
our enhanced carbon dot keypad RT18128-C
Price: $ 6.95 |

Stock #: RT18128-C
Improved - Larger 6mm Carbon dot Auxiliary keypads for the older
CX52 flex circuits with silk-screened black carbon traces (non
metal traces). Original Atari keypad has 4.5mm carbon dot. CX52
Auxiliary function pads with Three 6mm Diameter black conductive
dots or a 24 - 25% Increase in Conductive Contact Surface Area
as compared to the first Auxiliary keypads Atari made! Which
should roughly translate into a 24 to 25% Increase in life
expectancy for this New Larger Carbon Conductive CX52 Auxiliary
keypad.
Price: $ 4.95
|

Stock #: C018128-G
Gold plated Rev. 9 Flex Circuit - Upgrade now, this will last a
lifetime.
Price: $ 5.95 |

Stock #: CX52GS
Final answer to all Atari 5200 Joystick Owners problems. Install
this upgrade in your CX52 Controller and you will have a state
of the art game controller that will last a lifetime.
More control with the new State of the Art Tactical Feed back
feature. Now each time you press on the firm Improved Gold dot
fire button, as you release the Atari CX52 fire button, it will
bounce back and give your finger a Tactical response telling you
the fire button as been Pressed and Released..
Silicone Pad with Gold
Gold Plated Rev. 9 Flex CircuitNumeric Keypad, with Twelve 5 mm
Gold Dot metal contacts, 2 - Gold Contact Fire buttons with
State of the Art Tactical Feed back feature.
Price: $ 34.95 |
Stock #: AT101743
Atari C.P.S. Diagnostic Joystick Port Loopback Test Board for 2
port 5200 models only. Joystick port test boards are required to
run critical joystick port pokey diagnostic / adjust test and
continous cyccle 5200 burn in loop tests with 5200 diagnostic
cartrdige. For 4 port models see AT100046.
Price: $ 19.95 |
Stock #: AT100046
Atari C.P.S. Diagnostic Joystick Port Loopback Test Board for 2
port 5200 models only. Joystick port test boards are required to
run critical joystick port pokey diagnostic / adjust test and
continous cyccle 5200 burn in loop tests with 5200 diagnostic
cartrdige. For 2 port models see AT101743.
Price: $ 19.95 |
Stock #: RT021374
New 5200 - 2 port mother board assembly - populated.
Price: $ 43.95 |

Stock #: RT101184
5200 - 4 port retrofit kit changes the older 4 port model (p.c.
board RT018087) to be electronically equivalent to the 2 port
model so you can use the CX55 2600 cartridge adapter. NOTE:
Before ordering, check your system. Later models of the 4 port
5200 mother boards have this retrofit built in. Check the inside
left hand bottom corner, top side of the mother board for
CX5200P CAO REV. If you have this model you do not need the
retrofit to use the 2600 adapter. Instructions included...
Requires soldering.
Price: $ 6.95 |
Stock #: RT101183
Atari 5200 - 4 port U.S. NTSC unpopulated mother board. No chips
or RF cable.
Price: $ 28.95 |
Stock #: CA18087
Atari 5200 4 Port Mother Board Assembly Populated. (Requires
that you unsolder the old RF cable (CA018218) from the old PCB
and solder it on to the New Replacement Board. This replacement
board has the Retro fit kit built into the printed circuit
board. You can use the CX55 2600 Game Cartridge Adapter with
this board installed. If you order the CA018218 Heavy duty R.F.
cable at the same time, we will solder the cable in for you.
Price: $ 44.95 |
Stock #: CA018218
Atari 5200 4 Port Heavy Duty R.F. Cable Assembly. |
|
| |
|